Create a Recording


You can create a recording by either  uploading  a 16bit 8khz/16khz mono WAV file or recording via the procedure below


  1. Dial *732 and wait for the voice prompt
  2. Enter the password (pin_number) followed by the pound sign# Enter at least a 3 digit number. This will label the recording file. (recording100.wav)
  3. start talking to make the recording after the voice prompt and press the pound key #
  4. Press 1 to accept the recording then hang up or press 2 to start over.
../_images/fusionpbx_recordings1.jpg

Edit Recording

  1. Click the edit pencil icon.
  2. Rename as needed.
  3. Click save to save the changes.
../_images/fusionpbx_applications_recording_edit.jpg

Applying Recordings

Once you have a recording made you can use the recordings in different area’s of FusionPBX. Custom IVR’s and phrases would be the typical uses.